|
Product Description
|
D-Link DMS 3130-30TS - switch - 24 ports - managed - rack-mountable
|
|
Device Type
|
Switch - 24 ports - L3 - managed - stackable
|
|
Enclosure Type
|
Rack-mountable
|
|
Subtype
|
5 Gigabit Ethernet / 2.5 Gigabit Ethernet
|
|
Ports
|
24 x 100/1000/2.5G + 2 x 100/1000/2.5G/5G/10G + 4 x 10 Gigabit / 25 Gigabit SFP28
|
|
Performance
|
Switching capacity: 360 Gbps ¦ Bidirectional forwarding rate (64?byte packet size): 268 Mpps ¦ Stacking bandwidth: 200 Gbps
|
|
Capacity
|
Packet buffer size: 4 MB ¦ Units per virtual stack: 32 ¦ Queues per port: 8 ¦ Link aggregation groups: 32 ¦ IGMP groups: 1024 ¦ MLD groups: 1024 ¦ VLAN groups: 4094 ¦ ACL entries (ingress): 3072 ¦ ACL entries (egress): 1024 ¦ IPv4 routes (ARP entries): 4096 ¦ IPv6 ND entries: 1024 ¦ IP interfaces: 128
|
|
MAC Address Table Size
|
32768 entries
|
|
Jumbo Frame Support
|
9KB
|
|
Routing Protocol
|
Static IP routing, RIPng, OSPFv2, OSPFv3, STP, RSTP, MSTP, IGMP, IGMPv2, IGMPv3, MLD, MLDv2, PIM-SM, VRRPv2, VRRPv3, ECMP, RIP-1, RIP-2
|
|
Remote Management Protocol
|
IPv4, IPv6, DHCP, SSH-2, HTTP, HTTPS, OAM, Telnet, TFTP, SNMP 1, SNMP 2c, SNMP 3, RMON 1, RMON 2, RMON 3, RMON 9, NTP, SMTP, CLI, SSH
|
|
Features
|
6KV Surge protection, fanless, ONVIF support, VLAN support, built-in DIP switch, QoS, isolate mode, PD-Alive, flow control, full duplex mode, half duplex mode, auto-uplink (auto MDI/MDI-X), auto-negotiation, port-based VLAN, Auto Surveillance VLAN, tagged VLAN, Voice VLAN, VLAN management, Asymmetric VLAN, HOL Blocking Prevention, IGMP snooping, ERPS, loopback detection, Cable Diagnostics Function, LLDP support, port mirroring, MLD snooping, WRR, Broadcast Storm Control, Multicast Storm Control, Unknown Storm Control, DoS attack prevention, Green Technology, EEE, UDP support, TCP support, ARP support, BOOTP support, DHCP client, reset button
|
|
Compliant Standards
|
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az, IEEE 802.1Q, ITU-T G.8032, IEEE 802.1D, IEEE 802.1w, IEEE 802.1p
|
|
Power
|
AC 100-240 V (50/60 Hz)
|
|
Power Redundancy
|
Optional
|
|
Dimensions (WxDxH)
|
17.3 in x 9.8 in x 1.7 in
|
|
Weight
|
8 lbs
|
|
Manufacturer Warranty
|
Limited lifetime warranty with product registration
|
|
Device Type
|
Switch - 24 ports - L3 - managed - stackable
|
|
Enclosure Type
|
Rack-mountable
|
|
Subtype
|
5 Gigabit Ethernet / 2.5 Gigabit Ethernet
|
|
Ports
|
24 x 100/1000/2.5G + 2 x 100/1000/2.5G/5G/10G + 4 x 10 Gigabit / 25 Gigabit SFP28
|
|
Performance
|
Switching capacity: 360 Gbps ¦ Bidirectional forwarding rate (64?byte packet size): 268 Mpps ¦ Stacking bandwidth: 200 Gbps
|
|
Capacity
|
Packet buffer size: 4 MB ¦ Units per virtual stack: 32 ¦ Queues per port: 8 ¦ Link aggregation groups: 32 ¦ IGMP groups: 1024 ¦ MLD groups: 1024 ¦ VLAN groups: 4094 ¦ ACL entries (ingress): 3072 ¦ ACL entries (egress): 1024 ¦ IPv4 routes (ARP entries): 4096 ¦ IPv6 ND entries: 1024 ¦ IP interfaces: 128
|
|
MAC Address Table Size
|
32768 entries
|
|
Jumbo Frame Support
|
9KB
|
|
Max Units In A Stack
|
9
|
|
Routing Protocol
|
Static IP routing, RIPng, OSPFv2, OSPFv3, STP, RSTP, MSTP, IGMP, IGMPv2, IGMPv3, MLD, MLDv2, PIM-SM, VRRPv2, VRRPv3, ECMP, RIP-1, RIP-2
|
|
Remote Management Protocol
|
IPv4, IPv6, DHCP, SSH-2, HTTP, HTTPS, OAM, Telnet, TFTP, SNMP 1, SNMP 2c, SNMP 3, RMON 1, RMON 2, RMON 3, RMON 9, NTP, SMTP, CLI, SSH
|
|
Encryption Algorithm
|
SSL, TLS 1.0, TLS 1.1, TLS 1.2, SSL 2.0, SSL 3.0
|
|
Authentication Method
|
RADIUS, TACACS+
|
|
Features
|
6KV Surge protection, fanless, ONVIF support, VLAN support, built-in DIP switch, QoS, isolate mode, PD-Alive, flow control, full duplex mode, half duplex mode, auto-uplink (auto MDI/MDI-X), auto-negotiation, port-based VLAN, Auto Surveillance VLAN, tagged VLAN, Voice VLAN, VLAN management, Asymmetric VLAN, HOL Blocking Prevention, IGMP snooping, ERPS, loopback detection, Cable Diagnostics Function, LLDP support, port mirroring, MLD snooping, WRR, Broadcast Storm Control, Multicast Storm Control, Unknown Storm Control, DoS attack prevention, Green Technology, EEE, UDP support, TCP support, ARP support, BOOTP support, DHCP client, reset button
|
|
Compliant Standards
|
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az, IEEE 802.1Q, ITU-T G.8032, IEEE 802.1D, IEEE 802.1w, IEEE 802.1p
|
|
Built-in Devices
|
2 x fans
|
|
Status Indicators
|
Power, console, management, fan failure, USB, link/activity/speed, stack ID, RPS (Redundant Power Supply)
|